Australian Flange Dimensions
从我们在印度的大型澳大利亚标准水坑法兰购物，澳大利亚标准表D法兰制造商在孟买
检查澳大利亚标准法兰尺寸，从澳大利亚标准管道发布孟买
Australian Standard Pipe Flanges manufactured from Stainless Steel are Known for their resistance against corrosion, excellent Performance as well as good durability. These碳钢澳大利亚标准表D法兰meet the requirements of various industries with regards to their mechanical and physical properties. Hence, the Stainless Steel Australian Standard Puddle Flanges are used in industries like automobile, Water System, Shipbuilding, Natural Gas, heavy engineering, Oil Field, Offshore, railways, Electric Power and pipeline engineering.
Australian Flanges
Australian Standard Pipe Flanges
Australian Blind Flanges
Apart from being available in Standard Specifications, Australian Standard Flange Sizes can be arranged required by the buyer or depending on the end use of the product. With regards to the Australian Standard Flange Dimensions, the flanges are fabricated with the wall thickness having the same dimensions to that of the corresponding or matching pipes.澳大利亚标准法兰尺寸根据买方的要求，包括ANSI B16.5，ANSI B16.47，ANSI B16.47，A＆B，ASA，API-605，MSS SP44，AWWA或自定义图纸。
范围Australian Standard Flange Tablescaters to the requirements of various industries because they are ideal for use at high pressure. Further, the Australian Flange Chart can also be used in varied cold or hot temperatures.There are the following types of Australian Standard Puddle Flange - lapped joint flange(loose flange), Slip on flange, threaded flange, blind flange, welded neck flange, socket welded flange, Orifice Flanges and long welded neck flange
The material used to manufactureAustralian Standard Table D Flange包括碳钢等级，如A105，SS400，SF440 RST37.2，S235JRG2，P250GH和C22.8，不锈钢等级，如F304，F304L，F316，F316L，316TI和合金金属如铜，双面，超双水平，合金钢等。
TheAustralian Flange Dimensions从½英寸到60英寸（DN15-DN2000）。澳大利亚风格压力额定值从ANSI级别150到2500级，还包括以下DIN标称压力额定值DINPN6，PN10，PN16，PN25，PN40，PN64，PN100，PN160。给澳大利亚俚语的表面处理包括涂有防锈油，防锈涂料或锌。不锈钢澳大利亚标准水坑法兰can be coated with Zinc by either electroplating or by Hot dipped Galvanized.
澳大利亚标准表D法兰具有以下连接型 - 圈关节面，凸起面，平面，环形接头，大型男女，小男性，大舌和沟，小舌和凹槽。虽然澳大利亚标准法兰的法兰面类型可以是平面（FF），但抬起面（RF）或环形接头（RJT）。
| Specifications | Australian Flanges |
|---|---|
| Australian Flange Standards | ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, GOST Flanges. |
| ASME B16.5 Australian Flange size range | 1/2" (15 NB) to 48" (1200NB) DN10~DN5000 |
| Australian Flange StandardDIN | 6bar 10bar 16bar 25bar 40bar / pn6 pn10 pn16 pn25 pn40，pn64 |
| Australian Flange StandardANSI | 班级150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS |
| Australian Flange StandardUni. | 6Bar 10Bar 16Bar 25Bar 40Bar |
| Australian Flange StandardEN. | 6Bar 10Bar 16Bar 25Bar 40Bar |
| Australian Flange StandardAustralian | 5k，10k，16 k 20 k，30 k，40 k，63 k |
| Main Types | Forged / Threaded / Screwed / Plate |
| 法兰配套材料 | 垫圈，环形接头，法兰螺栓 |
| 最常见的类型AustralianFlanges |
|
| 连接类型/法兰面类型 | 凸起面（RF），环形接头（RTJ），平面（FF），大型男女（LMF），搭接 - 关节面（LJF），小型男女（SMF），小舌头，大舌和凹槽，凹槽 |
| 澳大利亚管道法兰测试证书 | EN 10204/3.1B 原材料证书 100% Radiography Test Report Third Party Inspection Report, etc |
| 生产技术 |
|
| 特殊的设计 | As per your drawing AS, ANSI, BS, DIN and Australian AustralianThreaded Flange, Socketweld Flange, Slip-On Flange, Blind Flange, Weld Neck Flange |
| 专业制造商 |
|
| Test | Hydrostatic testing machine, Direct-reading Spectrograph,UI trasonic flaw detector, X-ray detector, Magnetic particle detector |
| 设备 | 弯曲机，压机，电动斜布机，推动机，喷砂机等 |
| 起源 | 西欧/印度/美国/日本/韩国人 |
| Australian Flanges Standard | ANSI DIN, GOST, Australian, UNI, BS, AS2129, Australian, EN, SABS, NFE etc.
|
| Key markets and industries for Australian Flangeo |
|
| 输出到 | 印度尼西亚，爱尔兰，乌克兰，新加坡，沙特阿拉伯，加拿大，秘鲁，迪拜，巴西，伊朗，韩国，美国，印度，埃及，泰国，西班牙，阿曼等 |
| Australian Flanges Application |
|
| Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175 | |
Australian Flanges Flange Standards / Types and Pressure Class :
| ASME/ANSI B 16.36 | Welding Neck Flange, Slip on Flange, Threaded Flange |
| 压力类 | 300,400,600,900,1500,2500 |
| ASME/ANSI B 16.5 | Welding Neck Flange, Slip on Flange, Blind Flange, High Hub Blind Flange, Socket Weld Flange, Lap Joint Flange, Threaded Flange, Ring Type Joint Flange |
| 压力类 | 150,300,400,600,900,1500,2500 |
| ASME / ANSI B 16.47 | Welding Neck Flange, Blind Flange [Series A & B] |
| 压力类 | 75,150,300,400,600,900 |
| BS 4504 SEC 3.1 | Welding Neck Flange, Hubbed Slip on Flange, Hubbed Threaded Flange, Lapped Pipe End Flange, Plate Flange, Loose Plate Flange, Loose Plate With Weld Neck Flange, Blank Flange |
| 压力类 | PN 2.5 TO PN 40 |
| BS 4504[PART 1] | 焊接颈部法兰，枢轴滑动套装螺纹，板法兰，焊接板焊接板圈，空白法兰 |
| 压力类 | PN 2.5 TO PN 400 |
| BS 1560 BOSS. | Welding Neck Flange, Socket Welding Flange, Slip-On Flange, Blind Flange, Screwed Boss Flange, Lapped Flange |
| 压力类 | 150,300,400,600,900,1500,2500 |
| BS10 | Welding Neck Flange, Plate Slip-On Flange, Screwed Boss Flange, Slip-On Boss Flange, Blind Flange |
| 桌子 | D, E, F, H |
| DIN法兰 | DIN 2527, 2566, 2573, 2576, 2641,2642, 2655, 2656, 2627, 2628, 2629, 2631, 2632, 2633, 2634, 2635, 2636, 2637,2638, 2673 |
| 压力类 | pn 6到pn 100 |
15mm (1/2") Australian Flange Weight Chart
|
标准 |
班级 |
Diameter |
Bolt Circle Diameter |
螺栓数量 |
Bolt Size |
Diameter of Bolt Hole |
|---|---|---|---|---|---|---|
|
AS4087法兰 |
PN14 Flanges |
95. |
67. |
4 |
M12. |
14 |
|
作为2129的法兰 |
Table C Flanges |
95. |
67. |
4 |
13 |
14 |
|
Table D Flanges |
95. |
67. |
4 |
13 |
14 |
|
|
表E法兰 |
95. |
67. |
4 |
13 |
14 |
|
|
Table F Flanges |
95. |
67. |
4 |
13 |
14 |
|
|
表H法兰 |
114 |
83. |
4 |
16 |
17 |
|
|
Table J Flanges |
114 |
83. |
4 |
16 |
17 |
|
|
ANSI B16.5法兰 |
ANSI 150 Flanges |
89. |
60. |
4 |
13 |
16 |
|
ANSI 300 Flanges |
95. |
67. |
4 |
13 |
16 |
|
|
ANSI 600法兰 |
95. |
67. |
4 |
13 |
16 |
|
|
ANSI 900 Flanges |
121 |
83. |
4 |
19 |
22 |
|
|
ANSI 1500 Flanges |
121 |
83. |
4 |
19 |
22 |
|
|
Australian (DIN) Flange |
PN6 Flanges |
80 |
55 |
4 |
M10 |
11 |
|
PN10 Flanges |
95. |
65. |
4 |
M12. |
14 |
|
|
PN16法兰 |
95. |
65. |
4 |
M12. |
14 |
|
|
PN20 Flanges |
90. |
60..5 |
4 |
M14 |
16 |
|
|
PN25 Flanges |
95. |
65. |
4 |
M12. |
14 |
|
|
PN40 Flanges |
95. |
65. |
4 |
M12. |
14 |
ISO Certified Stainless Steel australian standard puddle Flanges manufacturer in India, Get Carbon Steel australian standard table d flanges stock at lower prices compared to USA & UK
|
Australian Threaded Reducing Flanges |
Australian Reducing Flanges |
|
澳大利亚WNRF法兰 |
ASME Australian Reducing Flanges |
|
Australian Split Flanges |
Australian Reducing Flange |
|
Australian Turbo Flanges |
Australian Forged Flanges |
|
Australian Vacuum Flanges |
Australian Reducing Flange |
|
Australian Reducing Flanges |
Australian Forged Flange |
|
Australian Split Flanges |
ASME Australian Blind Flanges |
|
澳大利亚滑动管道法兰 |
Australian Blind Flange |
|
澳大利亚广场法兰 |
Australian Ansi Flanges |
|
ANSI 150澳大利亚法兰 |
Australian JIS BLRF Flanges |
|
Australian Blank Flanges |
Australian Orifice Flanges |
|
澳大利亚BSP法兰 |
ASME Australian Orifice Flanges |
|
澳大利亚伴侣法兰 |
Australian Orifice Flanges |
|
Australian Class 150 Flanges |
Australian Duct Flanges |
|
Australian Cover Flanges |
Australian Orifice Flanges |
|
定制澳大利亚法兰 |
Australian Socket weld Flanges |
|
班级60.0 Australian Flanges |
ASME Australian Socket weld Flanges |
|
Australian Din Flanges |
Australian Socket weld Flanges |
|
Large Diameter Australian Flanges |
Australian SWRF Flanges |
|
Table E Australian Flanges |
ASME B16.5 Australian Socket weld Flanges |
|
Australian Floor Flanges |
澳大利亚螺纹法兰 |
|
Australian Forged Flanges |
ASME Australian Threaded Flanges |
|
Gaskets For Australian Flanges |
澳大利亚螺纹法兰 |
|
澳大利亚扶手法兰 |
Australian Manifold Flanges |
|
High Pressure Australian Flanges |
澳大利亚螺纹法兰 |
|
澳大利亚LAP关节法兰 |
澳大利亚螺纹法兰 |
|
Australian Long Weld Neck Flanges |
Australian Long weld Neck Flanges |
|
澳大利亚管道法兰 |
Australian Raised Face Slip On Flanges |
|
澳大利亚排气法兰 |
ASME Australian Slip On Plate Flanges |
|
澳大利亚标题法兰 |
Australian Slip On Flanges |
|
Australian Plate Flanges |
澳大利亚管道法兰 |
|
Australian Backing Flanges |
澳大利亚排气法兰 |
|
澳大利亚管法兰 |
ASME Australian Header Flanges |
|
Australian Metric Flanges |
Asme澳大利亚长焊接颈部法兰 |
|
Australian Muffler Flanges |
Australian Long weld Neck Flanges |
|
Australian Pump Flanges |
Australian Orifice Flanges |
|
Australian Pressed Flanges |
澳大利亚戒指型环形法兰 |
|
澳大利亚水坑法兰 |
Australian Ring Type Joint Flange |
|
澳大利亚垫法兰 |
澳大利亚RTJ法兰 |
|
Australian Reducing Flanges |
澳大利亚RTJ法兰 |
|
Australian Raised Face Flanges |
澳大利亚RTJ法兰 |
|
澳大利亚戒指法兰 |
澳大利亚RTJ法兰 |
|
澳大利亚Stub End Flanges |
Australian Raised Face Weld Neck Flanges |
|
Australian Shower Rod Flanges |
Australian Sae Flanges |
|
Australian Slip On Flanges |
澳大利亚焊接颈部法兰 |
|
Australian Screwed Flanges |
Australian Clad Flanges |
|
澳大利亚插座焊接法兰s |
Australian WNRF Flange |
|
Australian Sbc Header Flanges |
澳大利亚养脸盲法兰 |
|
Australian Flange |
|
|
Australian Slip-On Flange |
Australian Threaded Flange |
|
澳大利亚焊接颈部法兰 |
澳大利亚插座焊接法兰 |
|
Australian Blind Flange |
Australian Reducing Flange |
|
澳大利亚LAP联合法兰 |
Australian Plate Flange |
|
Australian Orifice Flange |
Australian Forged Flange |
|
Australian Ring Type Joint Flange |
Australian Square Flange |